 |
 |
The Klean Machine Easily Meets or Exceeds Specifications |
|
|
|
|
Recent Test Results
|
|
|
SOURCE EMISSIONS TESTS
KM-3 tests were conducted in accordance with Environmental Protection Agency (EPA) standards as defined in document Title 40, Code of Federal Regulations, Part 60 (40 CFR 60), Appendix A, Methods 1, 2, 3A, 4, 5 and 25A, and Puget Sound Air Pollution Control Agency (PSAPCA) Method 5 back-half extraction procedures.
The independent testing laboratory, AMTEST, of Washington State ran three (3) 60-minute tests. The TDU processed 11-12 CY of soil per hour during the tests (16 to 18 tons). EPA Method 25A was performed to quantify emissions of volatile organic compounds (VOC) as THC using a flame ionization analyzer (FIA). PSAPCA back-half analysis procedures were used for considerable matter analysis.
The government requirements and results of these tests are as follows:
| TEST FOR |
TEST TYPE |
STANDARDS |
RESULTS |
| VOC EMISSIONS |
METHOD 25A |
1 lb./hr |
0.48 lb./hr |
| PARTICULATE EMISSIONS |
METHOD 1,2,3A,4 & 5 |
0.02 gr./dscf/hr |
0.011 gr./dscf/hr |
Air emissions meet or exceed all North American standards permitable in all jurisdictions.
EKTI will help with permitting where applicable.
***Complete test results are available for review upon request.
Analytic Report - Northwest Labs, Lot#151785
Langley, BC Nov. 29 - Dec 6, 2001
| Soil Test Results |
KM3-HT |
Enviro-Klean Technologies Inc. |
| Analyte (given in dry weight) |
Units |
Results Before |
Results After |
Detection Limit |
| |
|
Gasoline |
|
|
| Mono-Aromatic Hydrocarbons - Soil |
|
Sample #1 - B |
Sample #1 - A |
|
| Benzene |
ug/g |
<0.02 |
<0.02 |
0.02 |
| Toluene |
ug/g |
5.32 |
<0.02 |
0.02 |
| Ethylbenzene |
ug/g |
14.1 |
<0.02 |
0.02 |
| Total Xylenes (m.p.o.) |
ug/g |
184 |
<0.02 |
0.02 |
| Styrene |
ug/g |
<0.02 |
<0.02 |
0.02 |
| Volatile Petroleum Hydrocarbons - Soil |
|
|
|
|
| VHs 6-10 |
ug/g |
1030 |
<1 |
1 |
| VPHs |
ug/g |
837 |
<1 |
1 |
| Extractable Hydrocarbons - Soil |
|
|
|
|
| EPHs 10-19 |
ug/g |
1340 |
<10 |
10 |
| EPHs 19-32 |
ug/g |
<10 |
<10 |
10 |
| |
|
Diesel |
|
|
| Extractable Hydrocarbons - Soil |
|
Sample #2 - B |
Sample #2 - A |
|
| EPHs 10-19 |
ug/g |
9860 |
14 |
10 |
| EPHs 19-32 |
ug/g |
2840 |
26 |
10 |
| |
|
Lube Oils |
|
|
| Extractable Hydrocarbons - Soil |
|
Sample #3 - B |
Sample #3 - A |
|
| EPHs 10-19 |
ug/g |
271 |
42 |
10 |
| EPHs 19-32 |
ug/g |
10900 |
97 |
10 |
| |
|
Composite HC |
|
|
| Extractable Hydrocarbons - Soil |
|
Sample #4 - B |
Sample #4 - A |
|
| EPHs 10-19 |
ug/g |
751 |
11 |
10 |
| EPHs 19-32 |
ug/g |
14400 |
84 |
10 |
| |
|
Grab Sample |
|
|
| Extractable Hydrocarbons - Soil |
|
Sample #5 - B |
Sample #5 - A |
|
| EPHs 10-19 |
ug/g |
1330 |
<10 |
10 |
| EPHs 19-32 |
ug/g |
12660 |
13 |
10 |
| |
|
Creosote |
|
|
| Extractable Hydrocarbons - Soil |
|
Sample #6 - B |
Sample #6 - A |
|
| EPHs 10-19 |
ug/g |
5710 |
47 |
10 |
| EPHs 19-32 |
ug/g |
9090 |
474 |
10 |
| |
|
Fines |
Fines |
Fines |
| |
|
Sample #1 Diesel |
Sample #2 Lube Oils |
Sample #3 Creosote |
| EPHs 10-19 |
ug/g |
<10 |
<10 |
<10 |
| EPHs 19-32 |
ug/g |
<10 |
<10 |
<10 |
Particulate: <6mg/m3
THC: <37 mg/kg |
|
|
|
|
|
|
|
|
